
Compatemon
Do you play Cobblemon? Do you also play with other mods? Then this is the mod for you! Compatemon is the one-stop-shop for all your compatibility needs, and allows for a more integrated minecraft experience with Cobblemon!
Screenshots


Über diese Mod
Compatemon
A Cobblemon Addon
This mod is designed to integrate the wonderful world of Cobblemon with other wonderful minecraft mods.
Each module should be fully independent and work without any of the others being loaded.There are additional integrations between the modules, however!
You may be asking yourself, "What's the point?" The point, my dear friend, is IMMERSION.
Features
- Not all modules are available for both Forge and Fabric. Development was focused on Forge, but testing did occur to make sure Fabric was supported where available.
- Each module has its own config file. The default values are recommended, of course, but testing has occurred at the fringes (in most cases). Any issues with values outside the default will be considered, but considered less important.
The Pehkui Module
Fabric and Forge!
Have you ever wanted your minecraft world to feel just a bit more varied? With the Pehkui Module, you can add a bit of variety to your life!
Pokemon will spawn in at a default range of 25% of their normal size to 150%! This isn't fully random, however! The distribution of sizes is on a bell curve centered around 100%. These default values are configurable, but be warned, as minecraft AI tends to break when hitboxes and bounding boxes get too large!
The Sophisticated Module - Sophisticated Storage
Forge Only
Have you ever wanted your storage controller to link to containers more than 16 blocks away? This fixes that! With a value fully configurable up to 256 blocks, your storage system can grow by leaps and bounds.
- Technically, this feature isn't truly an integration with Cobblemon. HOWEVER! And there is a however!! There will be! Stay tuned!
The Apotheosis Module
Forge Only
Have you ever wanted to have Bosses in Cobblemon? With the Apotheosis Module, your dream is a reality! PokeBosses spawn using the logic built in the base mod, but spawns are relative to the player, same as normal pokemon. You can expect the bosses to be a bit stronger than normal pokemon, so look out!
- Note: PokeBosses have more hearts and have their attributes/effects scaled same as Apotheosis bosses. Currently, their being a boss has no bearing on their in battle stats. This is planned however, so stay tuned!
PokeBosses are normally catchable by default, as essentially they're just stronger versions of normal pokemon. There is a catch, though! When a PokeBoss spawns from a boss spawner, it will NOT be catchable. This is due to slightly different logic that causes the pokemon spawned from these to be completely random. From the smallest Joltik to the largest Wailord, to even Moltres and other legendaries already implemented. This can be changed in the config, but as the goal is a natural integration between mods, you'll have to make the decision to enable this yourself!
Currently, this integrates with the Pehkui Module to have adjustable sizing for bosses separately than normal mods. This is configurable, and will not do anything if the Pehkui Module is not enabled (and installed)
This also adds a few extra modded blocks to the enchanting module of Apotheosis. Shouldn't have any effect unless you have the specific mods installed.
The Compatemon Module
Ah yes, my favorite module. Currently, this module is for any Cobblemon specific or Vanilla related changes that aren't really compatibility or anything else.
As of now, the only thing in this module is a setting for changing the default nickname length. By Cobblemon default, the longest nickname is 12 characters, and that's Just Not Good Enough.
- Yes, I'm aware the GUI doesn't handle nicknames larger than 12 characters very well. I want to make those fields auto-scroll or cut off or something similar, but I haven't gotten to it yet.
Future Plans
There's a biiiiiig list of mods in the TODO file that I've considered for Compatemon intergratabilities. However, I am OPEN to suggestions for ANY mod across the board, Forge or Fabric. I'll prioritize things as what is fun to code! But since that's a really vague standard, I'm more likely to work on something that has a LOT of changes involved, or that I use a lot in my normal modpacks. Also willing to prioritize cross platform mods over single platform ones, and if it's fabric only, good luck? Theoretically, could integrate fabric only mods too using sinytra, but I haven't experimented with that.
Verfügbare Versionen
Compatemon auf dem Server installieren
Server bestellen
Bestelle einen Minecraft Java Server mit mindestens 3 GB RAM (4 GB empfohlen).
fabric Loader setzen
Wähle im Panel unter "Egg" den fabric-Loader und die passende Minecraft-Version (1.20.1).
Mod installieren
Öffne den Mod-Browser im Dashboard und suche nach "Compatemon". Klicke "Installieren" – fertig! Alternativ: Lade die .jar via SFTP in den /mods Ordner.
Kompatibilität
Mod-Loader
Minecraft-Versionen
1.20.1
Server-seitig
✓ ErforderlichEmpfohlener RAM
4 GB(min. 3 GB)Häufige Fragen
Compatemon Server crasht beim Start – was tun?
Häufigste Ursache: falsche fabric-Version oder zu wenig RAM. Prüfe im Server-Log (latest.log), ob ein "OutOfMemoryError" oder "Mixin"-Fehler auftritt. Bei Mado Hosting: Stelle sicher, dass mindestens 3 GB RAM zugewiesen sind und der Loader zur Mod-Version passt (1.20.1). Über das Panel kannst du den Loader mit einem Klick wechseln.
Ist Compatemon mit fabric und forge kompatibel?
Compatemon unterstützt offiziell fabric, forge für Minecraft 1.20.1. Achtung: Forge- und Fabric-Mods sind NICHT untereinander kompatibel – wähle einen Loader und bleibe dabei. Im Mado Dashboard werden inkompatible Loader-Kombinationen automatisch erkannt.
Server laggt mit Compatemon – wie optimiere ich die Performance?
Empfohlener RAM: 4 GB (+1 GB pro 8 Spieler). Prüfe mit /spark profiler, ob Compatemon den meisten Tick-Time verbraucht. Häufige Fixes: Server-View-Distance auf 8-10 reduzieren, bei Forge "performant" oder "starlight" als Zusatz-Mod installieren. Bei Mado Hosting läuft dein Server auf NVMe-SSDs mit dedizierten CPU-Kernen für minimale Latenz.
Ähnliche Mods
Modded Server mieten
Installiere Compatemon mit nur einem Klick auf deinem Server.