Compatemon

Compatemon

Do you play Cobblemon? Do you also play with other mods? Then this is the mod for you! Compatemon is the one-stop-shop for all your compatibility needs, and allows for a more integrated minecraft experience with Cobblemon!

by
14.2K Downloads
fabricforgeadventuregame-mechanicsoptimization
Rent Server with this Mod

Screenshots

Compatemon Screenshot 1
Compatemon Logo

About this Mod

Compatemon

A Cobblemon Addon

This mod is designed to integrate the wonderful world of Cobblemon with other wonderful minecraft mods.
Each module should be fully independent and work without any of the others being loaded.There are additional integrations between the modules, however!

You may be asking yourself, "What's the point?" The point, my dear friend, is IMMERSION.

Features

  • Not all modules are available for both Forge and Fabric. Development was focused on Forge, but testing did occur to make sure Fabric was supported where available.
  • Each module has its own config file. The default values are recommended, of course, but testing has occurred at the fringes (in most cases). Any issues with values outside the default will be considered, but considered less important.

The Pehkui Module

Fabric and Forge!

Have you ever wanted your minecraft world to feel just a bit more varied? With the Pehkui Module, you can add a bit of variety to your life!
Pokemon will spawn in at a default range of 25% of their normal size to 150%! This isn't fully random, however! The distribution of sizes is on a bell curve centered around 100%. These default values are configurable, but be warned, as minecraft AI tends to break when hitboxes and bounding boxes get too large!

The Sophisticated Module - Sophisticated Storage

Forge Only

Have you ever wanted your storage controller to link to containers more than 16 blocks away? This fixes that! With a value fully configurable up to 256 blocks, your storage system can grow by leaps and bounds.

  • Technically, this feature isn't truly an integration with Cobblemon. HOWEVER! And there is a however!! There will be! Stay tuned!

The Apotheosis Module

Forge Only

Have you ever wanted to have Bosses in Cobblemon? With the Apotheosis Module, your dream is a reality! PokeBosses spawn using the logic built in the base mod, but spawns are relative to the player, same as normal pokemon. You can expect the bosses to be a bit stronger than normal pokemon, so look out!

  • Note: PokeBosses have more hearts and have their attributes/effects scaled same as Apotheosis bosses. Currently, their being a boss has no bearing on their in battle stats. This is planned however, so stay tuned!

PokeBosses are normally catchable by default, as essentially they're just stronger versions of normal pokemon. There is a catch, though! When a PokeBoss spawns from a boss spawner, it will NOT be catchable. This is due to slightly different logic that causes the pokemon spawned from these to be completely random. From the smallest Joltik to the largest Wailord, to even Moltres and other legendaries already implemented. This can be changed in the config, but as the goal is a natural integration between mods, you'll have to make the decision to enable this yourself!

Currently, this integrates with the Pehkui Module to have adjustable sizing for bosses separately than normal mods. This is configurable, and will not do anything if the Pehkui Module is not enabled (and installed)

This also adds a few extra modded blocks to the enchanting module of Apotheosis. Shouldn't have any effect unless you have the specific mods installed.

The Compatemon Module

Ah yes, my favorite module. Currently, this module is for any Cobblemon specific or Vanilla related changes that aren't really compatibility or anything else.
As of now, the only thing in this module is a setting for changing the default nickname length. By Cobblemon default, the longest nickname is 12 characters, and that's Just Not Good Enough.

  • Yes, I'm aware the GUI doesn't handle nicknames larger than 12 characters very well. I want to make those fields auto-scroll or cut off or something similar, but I haven't gotten to it yet.

Future Plans

There's a biiiiiig list of mods in the TODO file that I've considered for Compatemon intergratabilities. However, I am OPEN to suggestions for ANY mod across the board, Forge or Fabric. I'll prioritize things as what is fun to code! But since that's a really vague standard, I'm more likely to work on something that has a LOT of changes involved, or that I use a lot in my normal modpacks. Also willing to prioritize cross platform mods over single platform ones, and if it's fabric only, good luck? Theoretically, could integrate fabric only mods too using sinytra, but I haven't experimented with that.

Available Versions

Compatemon Forgerelease
MC 1.20.1forge
February 23, 2024
Compatemon Fabricrelease
MC 1.20.1fabric
February 23, 2024
Compatemon Fabricrelease
MC 1.20.1fabric
February 23, 2024
Compatemon Forgerelease
MC 1.20.1forge
February 23, 2024

How to Install Compatemon on Your Server

1

Order Server

Order a Minecraft Java server with at least 3 GB RAM (4 GB recommended).

2

Set fabric Loader

In the panel under "Egg", select the fabric loader and matching Minecraft version (1.20.1).

3

Install Mod

Open the mod browser in the dashboard and search for "Compatemon". Click "Install" – done! Alternatively, upload the .jar via SFTP to the /mods folder.

Compatibility

Mod Loaders

fabricforge

Minecraft Versions

1.20.1

Server-side

Required

Recommended RAM

4 GB(min. 3 GB)

Frequently Asked Questions

Compatemon server crashes on startup – what to do?

Most common cause: wrong fabric version or insufficient RAM. Check the server log (latest.log) for "OutOfMemoryError" or "Mixin" errors. With Mado Hosting: ensure at least 3 GB RAM is allocated and the loader matches the mod version (1.20.1). You can switch loaders with one click in the panel.

Is Compatemon compatible with fabric and forge?

Compatemon officially supports fabric, forge for Minecraft 1.20.1. Note: Forge and Fabric mods are NOT cross-compatible – pick one loader and stick with it. The Mado dashboard automatically detects incompatible loader combinations.

Server lagging with Compatemon – how to optimize performance?

Recommended RAM: 4 GB (per 8 players). Use /spark profiler to check if Compatemon consumes the most tick time. Common fixes: reduce server view-distance to 8-10, install "performant" or "starlight" as supplementary mods on Forge. With Mado Hosting, your server runs on NVMe SSDs with dedicated CPU cores for minimal latency.

Rent Modded Server

Install Compatemon with just one click on your server.

Recommended RAM
4 GBab €8/mo
Min. 3 GB | +1 GB pro 8 Spieler
Create Server Now
1-Click Mod Install
NVMe SSD Storage
DDoS Protection included

Details

License
MIT License
Server-side
Required

Supported Versions

1.20.1