

Modrinth · Fabric
Bellows auf deinem Minecraft Server
Bellows läuft auf Minecraft Servern mit Fabric. Bestell deinen Server, stell den Loader im Panel ein und installiere die Mod mit einem Klick im Mod-Browser.
No-compromises drop-in optimizations for Minecraft Commands/Datapacks.
- Downloads
- 1.7K
- Autor
- –
- Loader
- Fabric
- Minecraft
- 26.2 – 26.3
- Aktualisiert
- –
Einrichtung
Bellows auf dem Server installieren
Server und Spieler brauchen denselben Loader und dieselbe Minecraft-Version. Sichere die Welt, bevor du Mods hinzufügst oder aktualisierst.
- 01
Konfigurieren
4 GB RAM sind vorausgewählt. Laufzeit und Add-ons wählst du selbst, bezahlt wird per Kreditkarte oder PayPal.
- 02
Loader einstellen
Stell im Panel die Serversoftware auf Fabric und wähl die passende Minecraft-Version, zum Beispiel 26.3.
- 03
Mod installieren
Such im Mod-Browser nach „Bellows“ und installiere die Version für deinen Loader. Alternativ lädst du die .jar per SFTP in den Ordner mods. Erforderliche Abhängigkeiten stehen auf der Projektseite.
- 04
Verbinden
Bellows ist auf dem Client nicht nötig. Spieler verbinden sich über die Serveradresse aus dem Panel.
- Auf dem Server
- Erforderlich
- Auf dem Client
- Nicht nötig
- Loader
- Fabric
- Minecraft
- 26.3, 26.2
- Lizenz
- MIT License
Das Panel
Mods installieren, Fehler finden.
Echte Screenshots aus dem Mado Panel. Beides ist bei jedem Minecraft Server enthalten.
Mod-Browser
Modrinth und CurseForge direkt im Panel.
Der Browser filtert nach deiner Minecraft-Version. Mods installierst du mit einem Klick, ohne .jar-Dateien hochzuladen.

KI-Crash-Analyse
Wenn ein Mod crasht, liest die Analyse das Log.
Mods scheitern oft an einer falschen Loader-Version, Java-Version oder fehlenden Abhängigkeit. Die Analyse nennt eine wahrscheinliche Ursache und einen Lösungsvorschlag.

Versionen
Veröffentlichte Versionen
Nimm die Datei, die zu Loader und Minecraft-Version deines Servers passt. Server und Spieler brauchen dieselbe Version.
Bellows · Modrinth- Bellows 1.1.329. Oktober 2026Minecraft 26.3 · Fabric
- Bellows 1.0.217. September 2026Minecraft 26.2 · Fabric
Originalbeschreibung des Projektautors
Bellows (formally Radon)
Bellows is a no-compromises drop-in Fabric mod designed to apply targeted optimizations for Minecraft commands-- especially in environments with many large datapacks. Do to the targeted nature of Bellow's optimizations, performance gains are somewhat variable. Most large datapacks see a 50-60% reduction in tick time using Bellows. Certain packs like Animated Java can see a 70-90% reduction in tick time.
The following optimizations are used:
- Limiting serialization of NBT data to the requested data instead of all the data, saving massive time on
data get(etc.) operations. For example, if you dodata get entity @s Healthon a player, normally Minecraft would copy & send all of the player NBT data, including the +1000 long array of unlocked recipes. With Bellows, it will copy and send onlyHealthand nothing more. - Deserializing of NBT data is similarly limited to requested data only. This is twice as effective since reading NBT data requires first writing nbt data, which uses the above optimization.
- Entities are cached based on their type (supports type tags) and selector tags. When using @e, the search function will check the caches for valid types and selector tags, and will perform the @e search only on the smallest cache. That is, if you select
@e[type=marker,tag=my_tag]and there are 100 markers, 50 withmy_tag, then the @e will only search the 50 entities withmy_tag. Currently, this does not support type=! and tag=!. Note: As of 1.9.3, Minecraft limits @e searches to specific sub-chunks when using distance= and dx,dy,dz=. Bellows makes no attempt to optimize these searches, it only does global searches. - Fix for MC-168596 "Chunks outside of render distance are not unloaded if 'execute if block' runs on it every tick." While this may not be noticeable in single player, on a server hundreds of chunks can be force-loaded in random players' bases due to custom blocks receiving tickly
if blockchecks.
Special NBT cases:
- "Quick Data:" a type of optimization which pre-compiles an nbt modification and directly updates the entity, bypassing the normal NBT process (even with the other nbt optimization, this can save a lot of time). Currently only applies the transformations, but can be expanded to other data fields.
- The Transformation field on display entities always calculates the matrix form when built, even though the server never uses this form. Bellows disables this construction.
- "data" field on entities uses a standard deep copy instead of a Codec. Reduces time by ~50%.
Usage
If you're setting up a server with a lot of datapacks and you're already using performance mods (i.e. Lithium), or your computer is truly a potato and you need to squeeze out every drop of performance you can get, then definitely give Bellows a try. Just drop it in your mods folder and datapacks will magically perform better.
While Bellows provides drop-in optimizations, it changes optimization rules that apply in vanilla (like no longer needing to reduce @e usage aggressively). In general, it is considered bad practice to develop optimizations for Bellows specifically, but there are some exceptions like:
- You are in a controlled environment, i.e. your own server which is running Bellows
- You are using a pre-compiler which can provide a normal or Bellows build target
In testing, Moonrise (ports some of paper's optimizations to fabric) seems to synergize to Bellows, reducing tick time by significantly more than either alone. Give it a try!
Advanced Features
Want to see the difference for yourself? Bellows supports toggling optimizations on the fly using these commands. You can observe the mspt in f3, or run a profile with f3+L in single player and /perf <start/stop> in multiplayer:
/bellows nbt-optimiations <true/false>/bellows selector-optimizations <true/false>/bellows fix-block-access-forceload <true/false>
Bellows also has a debug mode, which can print potential problems to console if you find your commands aren't running faster or worse are running slower.
/bellows debug <command># this prints debug info from a single command/bellows debug-mode <true/false># this prints debug info for all commands (don't do this with ticking commands running)
Bellows Server crasht beim Start – was tun?
Häufige Ursachen: Loader- oder Minecraft-Version passen nicht zur Mod-Datei, eine Abhängigkeit fehlt oder der RAM reicht nicht. Such im Log (latest.log) nach „OutOfMemoryError“, „Mixin“ oder fehlenden Mods. Bei Mado wertet die KI-Crash-Analyse das Log aus und schlägt eine Ursache vor. Loader und Version änderst du im Panel.
Mit welchem Loader läuft Bellows?
Laut Modrinth unterstützt Bellows Fabric für Minecraft 26.3, 26.2.
Wie viel RAM braucht ein Server mit Bellows?
Als Orientierung 3–4 GB für einen Server mit dieser Mod. Das ist eine Schätzung, keine gemessene Mindestanforderung. Weitere Mods, viele Spieler und große Sichtweiten brauchen mehr. Ob eine Mod die Tick-Zeit belastet, siehst du mit dem spark-Profiler.
Ähnliche Mods
Beliebte Mods aus derselben Kategorie
Nur Client
Sodium
von jellysquid3
A high-performance rendering engine replacement for Minecraft, which greatly improves frame rates and reduces micro-stutter.
Nur Client
Iris Shaders
von coderbot
A modern shader pack loader for Minecraft intended to be compatible with existing OptiFine shader packs
Nur Client
Entity Culling
von tr7zw
Using async path-tracing to hide Block-/Entities that are not visible
Server-fähig
FerriteCore
von malte0811
Memory usage optimizations
Bereit für deinen Server mit Bellows?
4 GB RAM ab 8,00 € im Monat. 35 % auf den 1. Monat mit MADO35.