Bow Boostin' (BETA)

Bow Boostin' (BETA)

This is just a mod that makes bow boosting easier by automating it, there are multiple commands to help you customize it to ur liking, the default settings probably wouldn't work so feel free to customize anything and chekcing the settings with /bboost

by
1.4K Downloads
fabricgame-mechanicsoptimizationutility
Configure a Compatible Minecraft Server

About this Mod

> Description:

Bow Boostin is a client-side Fabric mod for Minecraft 1.21.11 that automates the bow boost movement technique - that thing where you sprint, jump, quick-draw a bow straight up, and the arrow comes back down and knocks you forward. It's a legitimately fast way to travel, but pulling it off manually is awkward and timing-dependent. This mod handles the whole sequence for you with a single keypress.


How It Works

When you trigger a boost, the mod runs through a tightly sequenced state machine:

  1. Saves your current camera angle
  2. Makes sure you're sprinting
  3. Jumps
  4. Waits until you're at the peak of the jump (when your upward velocity drops to near zero)
  5. Snaps or smoothly rotates your camera up to your configured angle (default 78Β°)
  6. Holds the bow draw for a configurable number of ticks
  7. Releases, firing the arrow upward
  8. Restores your camera to where it was
  9. Enters a cooldown period before allowing another boost

Before any of this happens, the mod checks that you're actually holding a bow, that you have arrows, and that you're on the ground. If any of those conditions aren't met, you'll get a quick error message and nothing happens.


Requirements

  • Minecraft 1.21.11
  • Fabric Loader 0.19.2 or newer
  • Fabric API
  • Java 21+

Keybind

The boost is bound to B by default. It shows up in your keybind settings under the Bow Boostin category. You can rebind it there, or use the /bboost keybind command described below.


Commands

Everything is configured through the /bboost command. Tab completion works on all arguments.


/bboost

Shows the full help menu with a list of every available subcommand and what it does.


/bboost toggle

Enables or disables the mod entirely. When disabled, pressing the boost key does nothing. Useful if you want to quickly turn it off without uninstalling or changing your keybind.


/bboost mode <toggle|hold>

Controls how the keybind behaves.

  • toggle - Press the key once to trigger one boost. You have to release and press again for another. This is the default.
  • hold - Functionally the same right now; one press fires one boost and you need to re-press. The distinction is there for future development.

/bboost delay

Sets a cooldown between boosts, measured in ticks (20 ticks = 1 second). Accepts values from 0 to 200. Default is 0, meaning you can chain boosts as fast as the sequence completes. Setting a delay gives you more control if you find yourself accidentally triggering back-to-back boosts.


/bboost angle

Sets the angle in degrees that the mod rotates your camera upward before firing. Accepts values from 10 to 89. Default is 78Β°. Higher angles send the arrow more directly overhead, which is generally what you want for maximum knockback distance. You might want to experiment with this depending on your situation.


/bboost draw

Sets how many ticks the bow is held drawn before releasing. Accepts 1 to 20. Default is 3 ticks (150ms). A longer draw charges the bow more, which affects arrow velocity and ultimately how much knockback you get. At 3 ticks the bow isn't anywhere near fully charged β€” the goal is a low-velocity arrow that arcs back down quickly, not a fully powered shot that flies off into the distance.


/bboost movement <snap|smooth>

Controls how the camera moves during the boost sequence.

  • snap - Your camera instantly jumps to the target angle and back. This is the default, and it's the most reliable.
  • smooth - The camera interpolates to the target angle and back over 4 ticks using an ease-out curve. It looks nicer but adds a few ticks to the sequence.

/bboost keybind

Changes the boost key without going into the keybind settings menu. You can pass a key name like r, g, mouse.left, etc. The mod will figure out the correct internal key name β€” you don't need to type key.keyboard.r, just r is fine. Mouse buttons use the format mouse.left, mouse.right, etc.


/bboost status

Prints your current configuration to chat. Shows whether the mod is enabled, your current keybind, mode, camera movement style, angle, draw time, and cooldown.


Notes

  • The boost aborts automatically if you open any screen (inventory, chat, etc.) mid-sequence and tries to restore your camera angle cleanly.
  • The mod works with arrows in any inventory slot, including spectral and tipped arrows.
  • The bow can be in either your main hand or your offhand.
  • Settings are not currently saved between sessions β€” you'll need to re-apply any changes after restarting.

Available Versions

Bow Boostin' 1.0.0release
MC 1.21.11fabric
May 9, 2026

How to Install Bow Boostin' (BETA) on Your Client

1

Install the Mod Loader Locally

Install fabric for your local Minecraft version.

2

Download the Matching File

Choose the Bow Boostin' (BETA) file for fabric and Minecraft 1.21.11.

3

Install Mod

Place the .jar file in your local .minecraft/mods folder and restart Minecraft. No server-side installation is required.

Compatibility

Mod Loaders

fabric

Minecraft Versions

1.21.11

Server-side

βœ— Unsupported

Recommended RAM

4 GB(min. 3 GB)

Frequently Asked Questions

Does Bow Boostin' (BETA) need to be installed on the Minecraft server?

No. Modrinth marks Bow Boostin' (BETA) as unsupported on the server side. Install it only in your local Minecraft mods folder. Your server can remain unchanged unless the mod page lists an additional dependency.

Which version and loader does Bow Boostin' (BETA) require?

Use a file for fabric and your exact Minecraft version. Supported versions include 1.21.11. Files for different loaders are not interchangeable.

Bow Boostin' (BETA) is not working – what should I check?

First check the Minecraft version, loader version and required dependencies. Put the .jar file in your local .minecraft/mods folder and remove older duplicates. Because this mod is client-side, adding server RAM will not fix it.

Minecraft Server for Your Group

Bow Boostin' (BETA) stays on your client. Host a compatible world for your group.

Recommended RAM
4 GBfrom €5.2/mo
Minimum 3 GB | per 8 players
Create Server Now
Client Compatibility Guide
NVMe SSD Storage
DDoS Protection included

Details

License
MIT License
Server-side
Unsupported

Supported Versions

1.21.11